top of page


BT-BTB pH-Rx-CLM.jpeg

The BT-BTB pH-Rx-CL/M range of pumps is a proven PTFE diaphragm type Solenoid Metering Pump that distinguishes itself with having a wide range of control options. Since its launch, the BT-BTB pump range has given proven reliability and quality. It is the ideal solution for many chemical dosing applications where moderate flow rate BTB or high flow rate (BT) are required with counter pressures up to 20 Bar (290 PSI).


Key Features: 

Either wall (BT) or foot mount (BTB) installations options available.

BTB - pump body construction of Anti-acids mica-filled reinforced polypropylene.

BT - pump body pump housing is constructed of cast Aluminium, protected by double coats of Epoxy paint.

Excellent water resistant for tough applications. Pump protection: IP65.


Liquid low-level option available to prevent loss of prime.

Flashing led showing pump’s stroke frequency.

Manual air bleeds polypropylene head for safe & easy priming with the durable leak-free bleed valve assembly.
Diaphragms are of superior construction, robust PTFE machined part not bonded composite layers, for optimum flexibility and long durability.
A wide variety of chemicals can be pumped due to different liquid end materials include glass-filled polypropylene (GFPPL), PVC, Polyvinylidene Fluoride (PVDF), PTFE, Plexiglas and 316SS. Valves and sealing in FPM (Viton), EPDM (Dutral), Nitryl, Silicone, ceramic and alloys.
Immediate installation and start-up, included as standard accessories with all models are an injection/back pressure valve assembly and a foot valve/strainer assembly, including discharge, suction and bleeding tubing.
Safe and easy priming and valve maintenance, included as a standard accessory is a bleed valve assembly, including return tubing (available only on those models with manual air bleed head).
Control panel protection assured by an adhesive polyester film, weather-proof and resisting UV light.
The silent version available upon request.
The products are manufactured according to CE regulation.
Standard power supply (fluctuations not to exceed ±10%): 230-240 V a.c.50-60 Hz single phase.
Optional power supply (fluctuations not to exceed ±10%): 110 V a.c. 50-60 Hz single phase. 48V a.c, 24V a.c/d.c., 12V d.c.
Overvoltage cat. II. Environmental Conditions: IP65 protection, altitude up to 2000m, ambient temperature 5°C to 40°C, maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C.


                                     Characteristics :

The BT-BTB pH-Rx-CL/M dosing pumps are activated by a PTFE diaphragm mounted on a piston of an electromagnet.
When the piston of the electromagnet is attracted, a pressure is produced in the pump body with an expulsion of liquid from the discharge valve. After each pump pulse is finished a spring brings the piston back to the initial position, with a recall of liquid through the suction valve.
The operation is simple the pump does not need lubrication, therefore maintenance is reduced almost to zero.
The BT-BTB pH-Rx-CL/M dosing pumps are microcontroller dosing pumps with pH, RX (mV), free Chlorine control and regulation meter. Backlight LCD display, ON/OFF-proportional operation modes, 0÷14pH; -1000÷+1400mV; 0÷2, 20, 200 ppm free Chlorine measuring range
Additional features: 4÷20mA output, free voltage relay alarm output. Manual/automatic temperature compensation 0÷100°C, proximity switch. Level switch input.
Any time the pump is in alarm the service output relay will be activated.
100% corresponds to the maximum stroke frequency, i.e. 120 strokes/min. Stroking rate gives very high rate of reproducible metering accuracy.
Menu navigation buttons
Confirm button "OK"
Alarm LED "yellow"
Pulse LED "red"
Power on LED "green"
LCD display
An appropriate electrode/probe (supplied as option) is required. Pump flow is according to user's set points (including hysteresis, on/off or proportional flow control). Option for level switch connection for pump auto-stop when chemical level is low (level switch supplied as option).
The flow rate of the pump will depend on the counter pressure in the discharge line (please check flow vs. pressure diaphragm) and on the physical properties of the chemical to dose. As general rule higher will be the pump flow rate lower is the counter pressure the pump will face.

bottom of page